专业字典>英语词典>abrasion tester翻译和用法

abrasion tester

英 [əˈbreɪʒn ˈtestə(r)]

美 [əˈbreɪʒn ˈtestər]

磨蚀(耗)试验器

机械

双语例句

  • According to the analysis of the performance of antifriction by using abrasion tester, coefficient of friction and wear loss were measured on the conditions of regular feeding oil and no oil.
    采用摩擦试验机对所制备的产物的抗磨性进行了表征分析;确定了正常供油状态下和无机油状态下,该纳米抗磨剂的摩擦因数及其磨损量。
  • The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.
    采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。
  • The mechanical properties, abrasion performance and mechanism of the RE/ MoSi_2 composites were investigated by means of friction and abrasion tester, vickers indentation, X-ray diffraction ( XRD), scanning electron microscope ( SEM) and microprobe this paper.
    采用磨损试验机、压痕法、X射线衍射仪(XRD)、扫描电子显微镜(SEM)及微探针等研究了稀土/MoSi2复合材料的力学性能、磨损性能及机理。
  • Under wet ball mill conditions, corrosive impact abrasion behavior of a newly developed low carbon high alloy steel liner material were researched with a modified MLD-10 wear tester, and comparison with the traditional high manganese steel was made.
    采用改进的MLD-10型冲击腐蚀磨损试验机,模拟湿磨工况条件,对新型衬板材质低碳高合金钢和传统材质高锰钢的抗冲击腐蚀磨损特性进行了研究。
  • Smith's cloth abrasion tester
    史密斯织物耐磨试验仪
  • At present, success has been made in material's formula, technology research and project application. Study on abrasion resistance and wet traction of tire tread by abrasion tester
    SPUA材料在建筑防水、裂纹修补、防腐、耐磨、抗湿滑、抢修及装饰等工程中具有广阔的应用前景。用室内磨耗试验机研究胎面胶的耐磨性和抗湿滑性
  • Abrasion wear test of Fe-20% Cr ahoy with carbon content ranging from 0.82% to 2.94% was conducted at 800 ℃ in a self-made high temperature wear tester. The worn surfaces and subsurfaces were observed by SEM.
    本文用自制的高温磨损试验机对碳含量0.82~2.94%的Fe-20%Cr合金进行了800℃下的高温磨损试验,并用扫描电镜观察了磨损面和磨损面亚表面的情况。
  • Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.
    在磨损试验机上对其耐磨性进行测试,同时利用扫描电镜对试样的磨损形貌进行观察分析。
  • The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.
    讨论了在动载三体磨粒磨损条件下,马氏体钢配副变化对磨粒磨损系统耐磨性的影响。
  • For material plastic, rubber, plywood, glass, painting, textile* etc, this abrasion tester provides a wide range test through different grinding wheel.
    简介举凡塑胶、橡胶、合板、玻璃、涂料、纺织等原物料都可使用之泛用性磨耗试验机。